PEUGEOT 5008 Handbook page 160

Displays in the instrument panel
Gear lever positions
N. Neutral
R. Reverse
1, 2, 3, 4, 5, 6. Gears in sequential
mode
AUTO. This comes on when the automatic
mode is selected. It goes off on
changing to sequential mode.
S. Sport (Sport function)
Place your foot on the
brake when this warning
lamp fl ashes (e.g.: when
starting the engine).
There is an audible signal when
reverse gear is engaged.
158
Moving off
Select position N .
Press the brake pedal down fully.
Start the engine.
N appears in the instrument
panel screen.
N fl ashes in the instrument
panel, accompanied by an au-
dible signal and a message in
the multifunction screen, if the gear
lever is not in position N on starting.
Foot on brake fl ashes in the instru-
ment panel, accompanied by an au-
dible signal and a message in the
multifunction screen, if the brake
pedal is not pressed on starting.
Keep your foot on the brake pedal,
move the gear lever to position A or
M to go forwards, or R to go back-
wards.
Take your foot off the brake pedal,
you can then move off.
The parking brake is released automati-
cally, otherwise release it manually.
AUTO and 1 or R appear in
the instrument panel screen.
If position R , A or M is selected, even
with the engine at idle, if the brakes are
released the vehicle moves without any
action on the accelerator. Never leave
children unsupervised in the vehicle
when the engine is running. When car-
rying out maintenance on the vehicle
with the engine running, apply the park-
ing brake and select position N .
Sequential mode
When the vehicle has moved off, se-
lect position M to change to sequen-
tial mode.
AUTO disappears
gears engaged appear in suc-
cession in the instrument panel
screen.
The gear change requests are only car-
ried out if the engine speed permits.
It is not necessary to release the accel-
erator during gear changes.
When braking or slowing down, the
gearbox changes down automatically to
allow vehicle to pull away in the correct
gear.
and the