Table of Contents
Advertisement
Operating faults
If the electric parking brake fault warning lamp comes on together with one or more of the warning lamps presented in these
tables, place the vehicle in a safe condition (on level ground, gear engaged) and contact a PEUGEOT dealer or a qualifi ed
workshop without delay.
Situations
Display of the message " Parking brake
fault " and of the following warning lamps:
Display of the message " Parking brake
fault " and of the following warning
lamps:
Display of the message " Parking
brake fault " and of the following warn-
ing lamps:
and possibly
fl ashing
146
-
The automatic functions are deactivated.
-
Hill start assist is not available.
-
The electric parking brake can only be used manually.
-
Manual release of the electric parking brake is only available by pressing the
accelerator pedal and releasing the control.
-
Hill start assist is not available.
-
The automatic functions and the manual application are still available.
-
The automatic functions are deactivated.
-
Hill start assist is not available.
To apply the electric parking brake:
Immobilise the vehicle and switch off the ignition.
Pull the control for at least 5 seconds or until application is complete.
Switch on the ignition and check the switching on of the electric parking brake
warning lamps.
The application is slower than during normal operation.
To release the electric parking brake:
Switch on the ignition.
Pull the control and hold it for approximately 3 seconds then release it.
If the braking warning lamp is fl ashing or if the warning lamps do not come on
with the ignition on, these procedures will not work. Place the vehicle on level
ground and have it checked by a PEUGEOT dealer or a qualifi ed workshop.
Consequences
Advertisement
Table of Contents
