PEUGEOT 5008 Handbook page 144

Hide thumbs Also See for 5008:
Table of Contents

Advertisement

Automatic application,
engine off
With the vehicle stationary, the parking
brake is automatically applied when
the engine is switched off.
The application of the parking brake is
confi rmed by:
-
illumination of the braking warn-
ing lamp and of the warning
lamp P in the control lever A ,
-
display
"Handbrake on".
An audible signal will confi rm to you
the application/release of your electric
parking brake.
Before leaving the vehicle, check
that parking brake warning lamp
in the instrument panel is on (not
fl ashing).
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
In the case of towing, a loaded vehi-
cle or parking on a gradient, turn the
front wheels towards the pavement
and engage a gear when you park.
142
Automatic release
The electric parking brake releases au-
tomatically and progressively when
you press the accelerator:
Manual gearbox: press down fully
on the clutch pedal, engage fi rst
gear or reverse, press on the accel-
erator pedal and move off.
Electronic gear control gearbox :
select position A , M or R then press
on the accelerator pedal.
Automatic gearbox: select posi-
of
the
message
tion D , M or R then press on the ac-
celerator pedal.
Full release of the parking brake is con-
fi rmed by:
-
the braking warning lamp
and of the warning lamp P in
the control lever A going off,
-
display
of
the
message
"Handbrake off".
When stationary, with the engine
running, do not press the acceler-
ator pedal unnecessarily, as you
may release the parking brake.
engine running
With the engine running and the vehicle
stationary, in order to immobilise the ve-
hicle it is essential to manually apply
the parking brake by pulling on control
lever A .
The application of the parking brake is
confi rmed by:
-
illumination of the braking
warning lamp and the warning
lamp P in the control lever A ,
-
display of the message "Hand-
brake on".
When the driver's door is opened, an
audible signal heard and a message is
displayed if the parking brake has not
been applied, unless the selector lever
is in position P (Park) in the case of an
automatic gearbox.
Label on the door panel
Before leaving the vehicle, check
that parking brake warning lamp
in the instrument panel is on, not
fl ashing.

Advertisement

Table of Contents
loading

Table of Contents