Perfect Multi-Gym Elite User Manual page 9

Before you use the Perfect ® Multi-Gym ® Elite you must install the Safety Clip. Follow
the instructions below to securely attach it to the door frame.
STEP 1
A) On the inside of the doorway, place
the Safety Clip above the molding in
the center at the top of the door.
Pointed End
A
Remove the Perfect
product is moved to a different door, you must recheck the fit in the new doorway if
necessary. Failure to follow these instructions may result in serious injury or death
STEP 2
Installation the Perfect
it in the door. The unit is correctly fitted in the doorway when it sits snugly at the top of the
door frame and the Hand Grips are level with the floor. Before exercising, check to make
sure it has been properly installed and can support your full weight by hanging on the bar
with your feet just a few inches off the floor.
WARNING: Perfect
adjustments. Failure to follow this instruction may result in serious injury or death.
From the outside of the doorway (the side that does not have the hinges), angle the
Connecting Bar end through the doorway and over the molding on the opposite side (the
inside of the doorway).
Inside of
Doorway
Wall
Connecting
Bar
Installing the Safety Clip
Safety Clip
Molding
Door Hinges
Multi-Gym Elite from the door frame when not in use. If the
® ®
Multi-Gym
® ®
Multi-Gym Elite from the door frame before making any Bolt
® ®
Outside of
Doorway
Molding
Left and Right
Bar Assembly
Hand Grip
Door Frame
Pad
B) Slide the pointed end between the
B
Elite in Your DoorwayAfter assembling the unit, try
Connecting Bar
Molding
9
wall and the molding. Push
downward until Safety Clip is flush
against the molding.
Inside of Doorway (hinged side)
Safety Clip
Grey Foam Crossbar