Perfect Multi-Gym Elite User Manual page 7

STEP 2
A) Locate the holes on the LEFT and RIGHT Curved Tube Assembly. Insert the LONG
Allen Bolt into the hole of the LEFT and RIGHT Curved Tube Assemblies.
B) Place the Plastic O-Ring onto the end of the Allen Bolt prior to assembly with the
Crossbar. Insert the end of the Short Allen Bolt into the top hole of the Crossbar, and
insert an Allen Nut into the bottom hole of the Crossbar. Start by hand-tightening the
nut into the bolt.
C) Repeat step "B" for both of the Curved Tube Assemblies. NOTE: Hand-tighten only, wait
until fully assembled to tighten with the Allen Wrench.
Left Curved Tube
Assembly
Plastic O-Ring
Short Allen Bolt
Carriage Bolt
(Left and Right Assemblies)
Allen Nut
Allen Nut
Tube Assembly
Right Curved Tube
Assembly
Crossbar
Left Bent
7
Front
Tube Assembly
Right Bent