Perfect Multi-Gym Elite User Manual page 8

STEP 3
A) Allen Bolt into the hole of the LEFT and RIGHT Curved Tube Assemblies. Make sure to
line up the holes of the connector bar with the holes on the Curved Tube Assemblies.
B) Insert the LONG Allen Bolt through the hole in front of the Connector Bar, and in the
hole in the Curved Tube Assembly. Insert an Allen Nut into the hole on the back of the
Connector Bar and hand tighten.
C) Repeat step "B" for both sides of the Connector Bar and Curved Tube Assemblies.
D) Once all of the components are assembled, use the two Allen Wrenches provided to
tighten all of the nuts and bolts.
Allen Nut
Connector Bar
Long Allen Bolt
Allen Nut
Long Allen Bolt
Front
8