PEUGEOT RCZ Handbook page 78

Model without AUTO lighting
Model with AUTO lighting
MANUAL CONTROLS
The lighting is controlled directly by the driver by means of the ring A
and the stalk B.
A. Main lighting mode selection ring: turn it to position the symbol
required facing the mark.
Lighting off / daytime running lamps.
Automatic illumination of headlamps.
Sidelamps only.
Dipped or main beam headlamps.
B. Stalk for switching headlamps: pull it to switch between dipped
headlamps / main beam headlamps.
In the lamps off and sidelamps modes, the driver can switch on the
main beam headlamps temporarily ("headlamp flash") by maintaining a
pull on the stalk.
dISPLAYS
Lighting of the corresponding indicator lamp on the instrument panel
confirms the switching on of the lighting selected.
The instrument panel has permanent back-lighting, both day and night.
In this case, illumination of the instrument panel is not linked to the
exterior lighting.
76