Clock - PEUGEOT RCZ Handbook

LIGHTING dIMMER
Permits manual adjustment of the brightness of the instruments and
controls to suit the ambient light level. Only operates when the vehicle
lighting is on, with the exception of the daytime running lamps.
Activation
F Press the button to change the brightness of the instruments and
controls.
F When the lighting reaches the minimum setting, release the button,
then press again to increase it.
or
F When the lighting reaches the maximum setting, release the button,
then press again to reduce it.
F When the lighting reaches the level of brightness required, release
the button.
deactivation
When the vehicle lighting is off, or in day mode on vehicles fitted with
daytime running lamps, pressing the button does not have any effect.

CLOCK

The analogue clock, located between the central vents of the
dashboard, does not have an adjustment button.
To set the time, refer to the section relating to your multifunction
screen's configuration menu.
The clock is synchronised with the multifunction screen time ; once the
the setting has been confirmed on the multifunction screen, the hands
will turn to synchronise with the screen, and each time the ignition is
switched on.
26