PEUGEOT RCZ Handbook page 135

dISPLAYS IN THE INSTRUMENT PANEL
The programmed information is grouped together in the instrument
panel screen.
5. Cruise control off / resume indication.
6. Cruise control mode selection indication.
7. Programmed speed setting.
PROGRAMMING
F Turn dial 1 to the "CRUISE" position: the cruise
control mode is selected but is not switched on
(OFF / Pause).
F Set the programmed speed by accelerating to
the required speed, then press button 2 or 3
(e.g.: 70 mph (110 km/h)).
You can then change the programmed speed using
buttons 2 and 3:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
F Switch off the cruise control by pressing button 4:
the display confirms that it has been switched off
(OFF / Pause).
F Switch the cruise control back on by pressing
button 4 again.
133