PEUGEOT RCZ Handbook page 136

EXCEEdING THE PROGRAMMEd SPEEd
Intentional or unintentional exceeding of the
programmed speed results in flashing of this speed in
the screen.
Return to the programmed speed, by means of
intentional or unintentional deceleration of the vehicle, automatically
cancels the flashing of the speed.
EXITING CRUISE CONTROL MOdE
F Turn dial 1 to the "0" position: the cruise control mode is
deselected. It disappears from the display.
OPERATING FAULT
In the event of a cruise control malfunction, the speed is cleared
resulting in flashing of the dashes.
Have it checked by a PEUGEOT dealer or a qualified workshop.
When the cruise control is switched on, be careful if you maintain
the pressure on one of the programmed speed changing buttons:
this may result in a very rapid change in the speed of your vehicle.
Do not use the cruise control on slippery roads or in heavy traffic.
On a steep descent, the cruise control will not be able to prevent
the vehicle from exceeding the programmed speed.
To avoid any risk of jamming of the pedals:
- ensure that the mat is positioned correctly,
- never fit one mat on top of another.
134