Set Up Your Bluetooth Card - Socket Bluetooth Connection Kit User Manual

Set up Your Bluetooth Card

Note: If you use the Get Connected! Wizard, which is recommended for
normal usage, then this step is not necessary. This step would be used to
change the friendly name of your mobile computer.
1. After you insert the Bluetooth Card, the Bluetooth icon
appear in the task tray (visible from the Today screen for Pocket PCs and
Pocket PC 2002s). Tap on the icon.
2. In the pop-up menu, select Advanced Features, then My Bluetooth Device.
3. In the My Bluetooth Device screen, enter a Friendly Name and make any
desired configuration changes. When done, tap OK.
Note:
• In normal phone connect operation, Discoverable mode is not needed
and should be disabled.
• If you do enable Discoverable mode, note that it does not shut off by
itself. To save power, remember to disable it when not needed.
• Connectable, Bondable, Use Authentication, and Use Encryption are
also not required for printing or dial-up networking applications.
CHAPTER 3: ADVANCED FEATURES | 21
should