Step 4: Dial-Up Networking - Socket Bluetooth Connection Kit User Manual

STEP 4: Dial-up Networking

Before setting up dial-up networking, prepare yourself with dial-up
information and other necessary settings for your office network or ISP.
Pocket PCs and Pocket PC 2002s
1. Pocket PC — Go to Start | Settings | Connections | Modems. In the next
screen, tap New Connection...
Pocket PC 2002 — Go to Start | Settings | Connections. Tap on the
Connections icon. In the top field, select Internet Settings. Tap Modify...
In the next screen, tap New...
2. In the next screen(s), enter a name for the dial-up connection and select
Bluetooth Phone for the modem. Tap Advanced...
Note: Remember what you name the connection. You will need it when
you start the connection.
3. The Port Settings screen will appear. For Flow Control, select None.
If needed, tap on the TCP/IP and/or Name Servers screens to enter any
necessary settings for your office network or ISP. Tap OK.
4. Tap Next.
5. In the Phone number field, enter the dial-up number. Tap Next.
6. Uncheck Wait for dial tone before dialing. Tap Finish.
CHAPTER 2: BASIC SETUP | 15