Socket Bluetooth Connection Kit User Manual page 18

5. Tap on the Call Options tab. Uncheck Wait for dial tone before dialing.
Tap OK.
6. If needed, tap on TCP/IP to enter any special network settings for your
office network or ISP. Tap OK.
7. Tap Next>.
8. Enter the dial-up number for your office network or ISP. Tap Finish.
9. Now you are ready to start the connection.
Go to Start | Control Panel | Remote Networking. Tap on the Bluetooth
connection you just set up. Make sure the correct dialing information is
entered, then tap Connect.
8. FOR MOTOROLA TIMEPORT 270C ONLY:
After you tap Connect for the first time, the phone will display a message
asking if you want to bond. Enter YES. Make up a 4-8 digit passkey,
enter it on the phone, then enter it on the mobile computer.
After successfully bonding, you can set up the phone for automatic
connections.
Automatic Connections for Motorola:
• On the phone, press MENU.
• Scroll to Settings, then press SELECT.
• Scroll to Connection, then press ON.
• On Bluetooth Link, press SELECT.
• Scroll to Devices, then press SELECT.
• Choose your mobile computer, then press EDIT.
• Scroll to Access:Ask, then press CHANGE.
• Scroll to Automatic, then press SELECT. Press DONE.
9. To use a different Bluetooth phone for dial-up networking, you can use
the same connection setup, but you must make the new phone your
favorite. Just run the Get Connected! Wizard again, select the new phone,
and make it your new Favorite when prompted. Or you can use the
Bluetooth Devices folder to change your favorite phone (see page 23).
18 | CHAPTER 2: BASIC SETUP