Operating Elements & Connections; Front Panel; Rear Panel - Omnitronic DJP-700P User Manual

4
OPERATING ELEMENTS & CONNECTIONS

Front Panel

No. Element
1 POWER switch
2 Audio player
3 Memory card slot
4 USB port
5 AUX input
6 INPUT SELECT switch
7 LEVEL control
8 LOW and HIGH tone control
9 MIC LEVEL control
10 MIC IN input

Rear Panel

No. Element
11 LINE 1‒4 INPUT jacks
12 OUTPUT jack
13 MODE switch
14 OUTPUT terminals
15 Power input
Function
Turns the unit on and off
• ► : play/pause
• V-/ und V+/ : previous/next title (short actuation) and volume up/down
(short actuation)
• MODE: selects the playback source (SD card, USB or Bluetooth)
For inserting an SD(HC) card
For inserting a USB storage medium
3.5 mm jack input for audio units with live level; when this jack is
connected, the audio player will be muted
Selects the signal source (LINE 1/2/3/4 or AUX 5)
Adjusts the overall volume
Adjust the low and high frequencies for the output signal
Adjusts the microphone volume
Microphone input jack (combination XLR/6.3 mm jack)
Function
Stereo RCA inputs for audio units with live level (e.g. CD player, tuner)
Stereo RCA output for connection to units with line level inputs (e.g. mixer
or additional amplifier
• STR: stereo operation with two speakers
• BRGD: bridge operation with double output power with one speaker
• + (red) and ‒ (black): for connecting speakers in stereo mode
• R (red) and L (red): for connecting a speaker in bridge mode
Used to plug in the supplied power cable
16