Safety
GUIDELINES FOR USING EXTENSION CORDS (CONTINUED)
•
Do not use excessive force to make connections.
•
Do not connect a three prong plug to a two prong cord.
•
Avoid overheating. Uncoil cord and do not cover it with any material.
•
Do not walk on cord.
•
Do not drive, drag or place objects over cord.
•
Use a 12 gauge,
115v
•
Regularly examine the supply cord for damage, such as cracking or aging. If damage is found, replace the cord before further use.
•
Only replace the supply cord with the type specified in the instruction manual.
Fax: 763-535-8255
cord, 50ft maximum length with this machine.
8
info@nationalequipment.com