Table of Contents
Advertisement
Jumper Settings
Clear CMOS
If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP5 pins 2 and 3 to On. Wait for a few seconds and set JP5 back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Chapter 2 Hardware Installation
Chapter 2
1 2
3
1-2 On:
Normal (default)
1 2
3
JP5
2-3 On:
Clear CMOS
15
Mini PCIe/mSATA Signal Select
JP9 is used to select the Mini PCIe (full-size) signal: Mini PCIe (default) or mSATA.
1 2
3
1-2 On:
Mini PCIe
(default)
JP9
1 2
3
2-3 On:
mSATA
www.dfi .com
Advertisement
Table of Contents
