Safety First - KickAss KADCDC25A User Manual

INSTALLATION GUIDE

SAFETY FIRST!

The KickAss Charger has been engineered to charge 12 Volt GEL, AGM, WET, CALCIUM
„
or LITHIUM only. Do not use this charger for any other purpose or with any other
battery types.
Do not attempt to charge known faulty, damaged, frozen or broken batteries.
„
Ensure charger is close to battery, however never mount the charger directly on the
„
battery.
Ventilation is very important in battery charging, always ensure battery positioning is
„
in well ventilated area to allow charging gasses to dissipate.
Keep sparks, flame away from batteries being charged as they could emit explosive
„
gases.
Always check the batteries and charging system periodically to ensure no faults
„
occur.
Ensure all cabling is secure and can not be cut or broken or short circuit.
„
Battery acid is corrosive if acid comes into contact with skin or eyes, please seek
„
medical advice.
Never connect this to charger to mains supply.
„
We recommend fitting a 50-75 amp fuse on both the input and output sides of the
„
charger such as the SKU: KAMAXIFHAND or SKU: KAFUSE to protect cables from
short circuit etc.
MOUNTING
It is most important to mount your KickAss Charger as close as possible to your auxiliary
battery and be sure to keep your charger away from turbos and exhaust pipes. This will
ensure maximum performance out of your charger.
DIMENSIONS
150
unit:mm
5
125
85
4.5