Table of Contents
Advertisement
Testing the Network
1. Ping a well known IP Address.
Finishing
1. Logout of the webpage.
2. Present the card to the reader to disable wireless
3. If wireless will never again be used on this reader, it can
be disabled in the hardware by setting bit 4 in the S1
DIP switch to ON (position left).
HONEYWELL IDENTIPOINT™ INTELLIGENT SMARTCARD SYSTEM
MAINTAINING THE
IDENTIPOINT READERS
System health tests
All system health tests described in this section can be
performed from the IdentIPoint device web pages. See
Configuring the Hardware topic for details on accessing the
same.
To perform fingerprint test:
1. Click Reader Information under Reader Profile. The
reader information page is displayed.
2. Click Fingerprint Test from the Diagnostics and Tools
list. The Finger Print Module Test page is displayed.
3. Click Test. A message Provide Your Finger Print
appears on the LCD of the reader.
4. Present your fingerprint on the scanner. The reader
scans the finger impression. A message Processing
Completed appears on the LCD indicating the comple-
tion of the scanning process. While holding or swiping
the finger should cover the IR sensor near to FP module
other wise the reader functionality will not work.
5. A message Provide Your Finger Print Again appears on
the LCD of the reader. Present your fingerprint on the
scanner. The reader scans the finger impression. A
message Processing Completed appears on the LCD
indicating the completion of the scanning process.
6. If the fingerprint matches then a message Finger Print
Matches appears on the reader LCD else a message
Finger Print Mismatches appears.
To perform LCD test:
1. Click LCD Test from the Diagnostics and Tools list. The
LCD Test page is displayed.
2. Type the message you want to convey in the Type Mes-
sage here box.
3. Click Test. The typed text is displayed on the LCD of the
reader.
4. Click Exit, to close the page.
To perform LED test
1. Click LED Test from the Diagnostics and Tools list. The
LED Test page is displayed.
2. Click the appropriate option from the Observe the LED
glowing.
45
95-7767
Advertisement
Table of Contents
