Honeywell IdentIPoint Installation Instructions Manual page 18

HONEYWELL IDENTIPOINT™ INTELLIGENT SMARTCARD SYSTEM
AFTER WIRING AND AFTER WIRING AND
OTHER HARDWARE OTHER HARDWARE
CONFIGURATIONS ARE CONFIGURATIONS ARE
DONE, SHUT THE FRONT DONE, SHUT THE FRONT
COVER OF THE IOM COVER OF THE IOM
95-7767
Fig. 16. Routing the wires and connecting them to the IOM PCB
18
ROUTE THE WIRES ROUTE THE WIRES
THROUGH THE KNOCK - THROUGH THE KNOCK -
OUT HOLES AND FIX OUT HOLES AND FIX
THEM TO THE CORRECT THEM TO THE CORRECT
TERMINALS ON THE PCB TERMINALS ON THE PCB
USING THE PROVIDED USING THE PROVIDED
WIRE TERMINAL BLOCKS WIRE TERMINAL BLOCKS