Introduction; Optional Add-Ons Specs - Sterisil AC+ System Installation And Maintenance Manual

INTRODUCTION

The ease of use and confidence that Sterisil® has brought to dental unit water line treatment now
comes to the world of distilled and deionized water for use with your office's table top autoclaves and
instrument washers. With a 5 stage purification process, the Sterisil® Ac+ produces up to 50 gallons of
distilled quality water with 0 parts per million total dissolved solids (ppm TDS). Full system monitoring
with audible and visual alarms make knowing when to replace cartridges worry-free. Automatic shut
off valves mean that cartridge replacement is also an easy, no-spill process. The Ac+ requires only
minutes of maintenance per year. Its space-saving design allows for easy installation even under sinks.
Get ready to reclaim your storage space from all of those plastic jugs and containers with the Ac+!
This manual will show you how to install and maintain your new Ac+ unit and answer a few frequently
asked questions that you may have. For additional support, please contact Sterisil® at (719) 622-7200 or
email technical support at support@sterisil.com.
OPTIONAL ADD-ONS:
Sterisil offers optional add-ons to the Ac+ to ensure proper performance. Installation of these items
can be found on pages 10-11. Optional add-ons are indentified in each relevant section by the color
purple. Specific requirements for add-ons must be understood before starting the installation.
ADD-ONS INCLUDE:
Pre-filter Kit
Booster Pump
Sterisil® Wand
835.2
Optional Add-on Components
(5"Dia x 12"H), Suggested use with source water quality > 250 PPM TDS
(4"Dia x 7"H), Suggested use with source water pressure < 60 PSI
Autoclave must be within 10' of the system
1