J2534 Toolbox - Matco Tools MAXIMUS Manual

MAXIMUS User's Manual

7 J2534 Toolbox

Flash programming has become a common and profitable procedure in the
repair and service of today's vehicles. As part of the 21st Century Tune-up,
reprogramming is often the only solution for problems ranging from driveability
and loss of power to poor fuel economy and emissions related issues. J2534box
makes it easy. The J2534box is a communication interface designed to support
J2534 specifications for ECU reprogramming and pass-thru diagnostics, while
J2534 Toolbox is a helper program to guide you through reprogramming and
performing after-flash routines.
Make sure JBOX(hardware device name) is properly connected, and then click
"J2534 Toolbox 3" on the desktop, the system starts up and then enter the login
interface as indicated in Fig. 7-1.
Fig. 7-1
If you have been a member, input your user name and password, then click
"Login" to enter. To avoid repeated input, check the box "Remember Me" and
the system will save your information. Next time you launch this program, the
screen will keep your data as it is. In case you forgot your password, click "Forgot
Password" to find back your password.
If you are a new user, click "Register" to enter registration page, then follow the
on-screen instructions to finish your registration.
For detailed operations on J2534 Toolbox 3, please refer to the user's manual of
JBOX.
52