Table of Contents
Advertisement
Table 5-13. Event Log Configuration Sub-menu (Continued)
Menu Option
Clear Event Log
PCIE Error Log
Memory ECC Error
Log
5-6
Security
Choose Security from the AMI BIOS Setup Utility main menu with the arrow keys to
bring up the S
ECURITY
highlighting the setting using the arrow keys and pressing <E
settings are described in
Menu Option
Supervisor Password
User Password
Change Supervisor
Password
Change User
Password
Boot Sector Virus
Protection
5-7
Boot
Choose Boot from the AMI BIOS Setup Utility main menu with the arrow keys to bring
up the B
S
OOT
ETUP
setting using the arrow keys and pressing <E
described in
Table 5-15
Description
This setting clears the Event Log memory of all messages. Options are OK and
Cancel.
This setting allows you to specify whether or not you wish to record a PCIE Error
Log. Options include Yes or No.
This setting allows you to specify whether or not you wish to record a Memory
ECC Error Log. Options include Yes or No.
S
menu. Security setting options are displayed by
ETUP
Table 5-14
Table 5-14. Security Menu Options
Description
This displays whether a supervisor password has been entered for the system.
"Not Installed" means that a Supervisor password has not been used.
This displays whether a user password has been entered for the system. "Not
Installed" means that a User password has not been used.
Select this setting and hit the <E
type in the Supervisor's password in the dialogue box to set or change the
Supervisor password, which allows access to the System's BIOS.
Select this setting and hit the <E
following options;
• Full Access (default) – This grants full user read and write access to the
BIOS Setup Utility.
• V
O
– This allows access to the BIOS Setup Utility, but does not
IEW
NLY
allow the fields to be changed.
• L
– This allows only limited fields to be changed such as D
IMITED
T
.
IME
• No Access – This prevents User access to the BIOS Setup Utility.
NOTE: This option is only available when the Supervisor Password has been set
above.
When Enabled, the AMI BIOS displays a warning when any program or virus
issues a Disk Format command or attempts to write to the boot sector of the hard
disk drive. Options include Enabled and Disabled.
menu. Security setting options are displayed by highlighting the
below.
below.
> key to access the sub-menu and then
NTER
> key to access a sub-menu with the
NTER
>. All Security BIOS settings are
NTER
5-15
Chapter 5: BIOS
>. All Security BIOS
NTER
ATE
and
Advertisement
Table of Contents
