Advertisement
Available languages
Available languages
6. Now press only the arrow up key until you reach the desired
number of LEDs indicating the ozone on time in hours you
require. While holding down the up arrow key press the down
key. This will save the programmed time period and take you
back to operating mode.
7. You can now continuously check the ozone concentration and
time period that has been programmed.
Guide for Programming your V
Ozone Concentration and On-Time Period
Below are some suggested settings for different marine aquarium water volumes
with the average mg of ozone per litre per hour over a 24 hour period.When
your water volume is different from those volumes shown in the table below,use
the settings nearest the water volume in your aquarium system.
M RINE
Water
3
Volume O
(litres)
50
1 LED
100
1 LED
250
1 LED
500
1 LEDs 10 LEDs 0.041
750
2 LEDs 8 LEDs
1000
2 LEDs 10 LEDs 0.041
1500
3 LEDs 10 LEDs 0.041
2000
4 LEDs 10 LEDs 0.041
2500
5 LEDs 10 LEDs 0.041
Start up Settings
Time
1 LED
2 LEDs
5 LEDs
2
Ozone Generator's
Settings after 2 Weeks
3
mg/L/H
O
0.041
1 LED
0.041
1 LED
0.041
1 LEDs 10 LEDs 0.083
2 LEDs 10 LEDs 0.083
0.044
3 LEDs 10 LEDs 0.083
4 LEDs 10 LEDs 0.083
6 LEDs 10 LEDs 0.083
8 LEDs 10 LEDs 0.083
10 LEDs 10 LEDs 0.083
7
Time
mg/L/H
2 LEDs
0.083
4 LEDs
0.083
Advertisement
