MIQ/A Overview Overview How to use this component operating manual Structure of the IQ Sensor Net Operating Manual IQ S ENSOR operating manual System Operating Manual (Ring Binder) IQ Sensor MIQ Module MIQ Terminal Operating Operating Operating Manual Manual Manual Component Operating Manuals Fig.
Overview MIQ/A Features of the MIQ/A General characteristics The MIQ/A module extends the IQ S system 2020 XT USB ENSOR by a fully automatic air pressure compensation for D.O. sensors (see system operating manual). With the standard MIQ module housing, the MIQ/A has the same characteristics as all MIQ modules regarding stability, leakproofness and weather resistance.
MIQ/A Safety instructions Safety instructions This component operating manual contains special instructions that must be followed during the installation of the MIQ/A module. Thus, it is essential to read this component operating manual before carrying out any work using this sensor. In addition to this manual, the S AFETY chapter of the IQ S system operating manual must be...
Safety instructions MIQ/A General safety instructions The MIQ/A is constructed and inspected in accordance with the relevant guidelines and norms for electronic instruments (see chapter ECHNICAL DATA It left the factory in a safe and secure technical condition. Function and The failure-free function and operational safety of the MIQ/A is only operational safety guaranteed if the generally applicable safety measures and the special...
MIQ/A Installation Installation Scope of delivery The following parts are included in the scope of delivery of the MIQ/A: MIQ/A. 4 x screwed cable glands with seals and blind plugs 2 x ISO blind nuts (M4) 2 x cheese-head screws (M4x16) with plastic washer 1 x contact base 2 x plastic tapping screws for fixing the contact base Operating manual.
MIQ/A Maintenance and cleaning Maintenance and cleaning Maintenance The MIQ/A requires no special maintenance. The general maintenance of IQ S components is described in the IQ S ENSOR ENSOR system operating manual. Cleaning The cleaning of IQ S components is described in the ENSOR IQ S system operating manual.
Page 12
Maintenance and cleaning MIQ/A ba75775e01 08/2008...
MIQ/A Technical data Technical data Note General technical data on MIQ modules are given in the T ECHNICAL chapter of the IQ S system operating manual. DATA ENSOR Electrical data Nominal voltage Max. 24 VDC via the IQ S (for details, see ENSOR chapter T of the...
Page 14
Technical data MIQ/A ba75775e01 08/2008...