Placement; Connecting Ultima To - Chord Ultima User Manual

Chord Electronics 4.1

Placement

Ultima | Manual 4.2

Connecting Ultima to

_ ancillary equipment
4.3 Audio inputs
Placement 4.1
Whilst Ultima will operate normally
within a Chord Electronics Reference
configuration stacked via the Integra
legs, it is recommended that Ultima is
allowed to 'breathe' with 10cm of space
around it to convection-cool during
operation.
24 // 30
4.4 Audio outputs
4.5 Power-on sequence and 12V trigger
4.6 Earthing issues in Europe
Chord Electronics 4.1 Placement
Ultima | Manual 4.2 Connecting Ultima to
_ ancillary equipment
4.3 Audio inputs
Connecting Ultima 4.2
to ancillary equipment
When connecting the Ultima to
equipment within the signal path,
ensure all devices are switched off. It is
recommended that once all equipment
is properly connected, that the volume
setting is operated to its lowest
setting, before slowly being raised to
a comfortable listening level. Always
observe partnering manufacturers'
guidelines.
4.4 Audio outputs
4.5 Power-on sequence and 12V trigger
4.6 Earthing issues in Europe
25 // 30