Table of Contents
Advertisement
When selecting digital CTCSS (squelch) codes, some receiving units may require inverted Octal
numeric codes. Typically, receivers use the non-inverted codes. CB200 is set to non-inverted by
default.
Press Up or Down button until "Inverted Codes?" appears.
WARNING: If the incorrect digital code is selected, the radio broadcast will not open the squelch
of the receiving unit.
Motorola_CB200_SMBL_REV5_08242017_FCC_Test.indd 23
INVERTED CODES
Press Enter
Press Up or Down to select between
NORMAL and INVERTED. Press Enter
to select the new setting.
23
8/24/2017 7:34:48 PM
Advertisement
Table of Contents
