Mounting The Device - Motorola CB200-M User Manual

MOUNTING THE DEVICE

24
The CB200 can be mouted to the wall using the included 3M DuoLock strips or by using the
optional wall mounting bracket.
Using 3M DuoLock
Ensure both the back of the callbox and the area of the surface that is being attached to is clean,
flat, and dry.
1. Peel off one side of the DuoLock's release backing and firmly adhere to the left side of the unit.
Repeat this with the other DuoLock to the right side of the callbox.
2. Once both strips of DuoLock are attached to the callbox, peel off the white release backing and
carefully align the unit to be level on the surface you intend to place it.
Motorola_CB200_SMBL_REV5_08242017_FCC_Test.indd 24 8/24/2017 7:34:48 PM