Boston Scientific LATITUDE 6280 Patient Manual page 55

If using the USB Ethernet Adapter:
• Make sure the USB cable provided
with the USB Ethernet Adapter is
connected at one end to the UsB
Ethernet Adapter and at the other
end to the Communicator.
• Make sure the Ethernet cable
provided with the USB Ethernet
Adapter is firmly connected at one
end to the USB Ethernet Adapter
and at the other end to the Ethernet
port for your Internet service.
• if the green light on the front of the
USB Ethernet Adapter is not on,
make sure the internet modem or
router is powered on.
To verify that troubleshooting was a
success:
• Press and hold the status button
until the Sending Waves flash green
in sequence and repeat. If the
connection is successful, all three
Sending Waves will light green for 2
minutes.
LATITUDE Communicator Patient Manual
®
51