NEC SV9100 Quick Reference Manual page 2

CONFERENCE CALL:
With a call in progress (internal or external)
•
Press CONF Key.
•
Dial internal or external number.
•
When the third party answers, press ADD Soft key.
•
Press BEGIN Key.
•
A three way conference is now established.
NOTE:
Any party may exit the Conference by hanging up. The 2 parties will remain connected, as
long as one of the remaining parties is internal.
ANSWER A SECOND CALL
•
Ask first caller to hold the line
•
Press HOLD key.
•
Press ANSWER key and speak to second caller.
NOTE:
Toggle between both calls by pressing HOLD, and pressing required line.
CALL FORWARD ALL
Forwards all calls immediately.
To Set
•
Lift Handset and press CF/A Key or dial 741.
•
Dial 1 to Set.
•
Dial destination number.
•
Replace Handset.
To Cancel
•
Lift handset, press CF/A key or dial 741.
•
Dial 0 to Cancel.
•
Replace Handset.
CALL FORWARD BUSY/NO ANSWER
Forwards calls only after 4 – 6 rings and on busy tone.
To Set
•
Lift Handset and press B/NA Key or dial 744.
•
Dial 1 to Set.
•
Dial destination number.
•
Replace Handset.
To Cancel
•
Lift handset and press B/NA key or dial744.
•
Dial 0 to Cancel.
•
Replace Handset.
1300 338 266
CALL PICK UP
To answer a ringing extension in your group:
•
Lift handset and press PICK Soft key or dial ∗ #.
For ringing extensions not in your group:
•
Lift handset, dial ∗ ∗ plus ringing Extension number
CALLBACK – To set a callback to a busy extension
•
When you call an extension dial # to set the calback
•
When the called extension becomes idle, the system will automatically call you back
MESSAGE WAIT
When calling a busy or unanswered digital telephone:
To Set
•
Dial 0 or press MW Soft key.
•
Replace Handset.
The destination extension will display MW as well as the flashing LED.
To Cancel (from originating extension)
•
Lift Handset or press Speaker.
•
Dial 773 for all or 771 for specific number.
•
Replace Handset.
To Cancel or Respond (from receiving extension)
•
Lift Handset or press Speaker.
•
Dial ∗0 or press MW Soft key.
•
Either press Call or Canc Soft key.
•
Replace Handset.
DISPLAY
To adjust the Display:
Press the Cursor button up or down while the phone is idle.
SPEAKE/RECEIVER VOLUME
To adjust the Speaker/Receiver Volume:
Press the Cursor button up or down during conversation
RING VOLUME
To adjust the Ringing Volume:
Press the Cursor button up or down during ringing.
The DT Series has 8 kinds of ringer tones which you can select :
•
Press Speaker anddial 720.
•
Dial 1 to set Internal ring: Dial 2 to set External ring.
•
Dial code for desired ring pattern (1~8).
•
Replace Handset.