Hamilton Beach FlexBrew Operator's Manual page 15

Single-serve coffee maker

Hide thumbs Also See for FlexBrew:

Troubleshooting

PROBLEM

Coffee not dispensing.

Failed foil seal.

PURGE on display.

840274900 ENv02.indd 15

(cont.)

PROBABLE CAUSE/SOLUTION

• Piercing needle is clogged with coffee grounds. Turn unit off; unplug. Allow unit to cool

completely. To remove any built-up coffee grounds, insert end of bent paper clip into eye and up

into piercing needle.

• There is variability in the single-serve pack manufacturing process which causes some types of

single-serve packs to be weaker at the seams. Brew using a different brand of single-serve packs.

• Place travel mug on cup rest. Press

(ON/OFF) button for 3 seconds.

11/4/2016 9:53:19 AM

Table of Contents