Hamilton Beach FlexBrew Operator's Manual page 12

Single-serve coffee maker

Hide thumbs Also See for FlexBrew:

How to Purge

NOTE: If you want to stop the

brew cycle at any time and

switch to a smaller cup size,

purge water from the unit.

Purge function allows you to

empty the reservoir into a cup

and replace it with fresh water.

This is recommended when it

has been more than a week

without any use.

How to Clean the Piercing Needle

If Needle is Clogged: The needle is located above the coffee drawer inside the unit. Remove coffee drawer. Bend a small paper clip as shown;

insert the tip of the paper clip through the hole/eye of the needle to ensure grounds have been removed. Replace coffee drawer and place a

large travel mug on cup rest. Brew 2 or 3 times with cold water. Be careful, the needle is sharp. Do not touch the needle when cleaning it.

840274900 ENv02.indd 12

Place mug on cup rest. Press

(ON/OFF) button for 3 seconds.

When the coffee maker is purging,

the

button will illuminate and

will turn off when the cycle is

complete.

11/4/2016 9:53:18 AM

Table of Contents