Fisher & Paykel DD*C Series Operating Instructions Manual page 4

DD*C Models
If Sanitization has been successful:
• The dishwasher will beep.
• will show in the display.
• The sanitize indicator will remain lit.
• After 30 seconds the display will turn off.
If Sanitization has not been successful:
• An alert will sound.
• An alert code will show in the display.
• The sanitize indicator will not be lit.
• Check if the water supply has been turned off or the
wash program interrupted.
• Press once to stop the beeping and then again to
clear the alert code, then run the sanitize cycle
again. See also section 'How to attend to a fault'.
DD*D and DD*I Models
If Sanitization has been successful:
• The wash will finish as normal.
If Sanitization has not been successful:
• An alert will sound.
• When the drawer is opened the sanitize indicator will flash.
• Check if the water supply has been turned off or the wash program interrupted.
• Press and hold once to stop the beeping and a second time to clear the flashing alert code.
• Reset sanitize and then run the cycle again.
• See also section 'How to attend to a fault'
https://producthelp.fisherpaykel.com/au/Clean/DishDrawer%E2%84%A2/Integrated_Double/DD60DI9/User_Guide_DD60DI9/03_Operatin
Updated: Wed, 13 Mar 2019 03:46:11 GMT
Powered by
4