Fisher & Paykel DD*C Series Operating Instructions Manual page 3

DD*D and DD*I Models
To set a Wash Modifier
• Make sure the dishwasher is on and detergent (and rinse aid if necessary) has been added.
• Press to select a wash program.
• Press to scroll through the wash modifier options.
◦ The selected wash modifier indicator will light up on the display.
◦ Press to start the wash and close the drawer.
Using Sanitise
The sanitize wash modifier adjusts the wash program to meet the conditions required by Section 6, NSF 184 for
sanitization to occur. While sanitize is running, the wash program is monitored to ensure that these conditions are met.
• Only programs utilising the sanitize wash modifier are certified to meet the conditions required by
• For sanitization to occur, the temperature of the water needs to reach 700C/1580F. Check that
• If the wash is interrupted or the water supply is turned off during the program, then the heating
At the end of a wash program with sanitize, always check to make sure that sanitization has been successful.
https://producthelp.fisherpaykel.com/au/Clean/DishDrawer%E2%84%A2/Integrated_Double/DD60DI9/User_Guide_DD60DI9/03_Operatin
Section 6, NSF 184. Other wash programs may not reach the temperatures required for
sanitization to occur. See table on previous page for wash programs that have sanitize available
all items are 'dishwasher safe' before running the sanitize modifier.
conditions for sanitization may not be met. You may need to run the program again to ensure
sanitization of your dishes.
Updated: Wed, 13 Mar 2019 03:46:11 GMT
Powered by
3