Download Print this page

Philips 9290 014 61062 Installation Manual

Wireless controller

Advertisement

Quick Links

For detailed information of APP , please refer to :
www.beesmart.com.hk:88
2018 Signify Holding, IBRS 10461, 5600VB, NL. All rights reserved.
The information provided herein is subject to change, without notice. Signify does not give any representation or warranty
as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any commercial offer and does not form part of
any quotation or contract, unless otherwise agreed by Signify.Philips and the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
Parts description
Toggle switch
Socket for software update
Battery
Battery
Remote controller
Rear plate
Magnet end cap
Battery exchanged
Remove the battery gently with your hand. Put the new battery into the lower part of the left spring plate first and pushing it from the
right side for installing
www.philips.com/lighting
Installation guide
Wireless Controller
1. Communication distance: 15-30M
Wireless
Wireless Controller
9290 014 61062
12NC
9290 014 61062

Advertisement

loading

Summary of Contents for Philips 9290 014 61062

  • Page 1 The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
  • Page 2 Keys instruction First to dial down the toggle switch so that the controller is in normal remote-control mode 1 . ① key is group 1, press it to control those lamps in the group 2 . ② key is group 2, press it to control those lamps in the group 3 .