To Change The Memory Storage For Recorded Files Later - Sony PCM-D10 Operating Instructions Manual

SD cards that can be used with the
linear PCM recorder
With the linear PCM recorder, you can use the
following SD cards.
• SD card (capacity of up to 2 GB)
• SDHC card (capacity of 4 GB to 32 GB)
• SDXC card (capacity of 48 GB or more)
For the latest information about the
compatible SD cards, see customer support
websites on page 85.
Due to the specifications of the linear PCM
recorder, the maximum size of a single file
that can be stored on the SD card is less than
4 GB for an LPCM file and less than 1 GB for an
MP3 file.
Note
Not all of the compatible SD cards are assured for
successful operation.
To remove the SD card
Make sure that "Please Wait" is not displayed
on the display window, and then push the
SD card into the recorder. When it pops out,
remove it from the SD card slot.
Note
While recording or playback is in progress, do not:
– remove/insert the SD card.
– remove the batteries.
– disconnect/connect the USB Type-C cable.
Doing so may damage the data.
To change the memory storage
for recorded files later
1
While recording is on standby, press
the OPTION button to display the
OPTION menu, and then select
"Recording Folder."
The Memory Selection screen is displayed.
2 Press the  or  button to select
"Built-In Memory" or "SD Card," and
then press the  button.
The list of folders on the selected memory
storage is displayed.
3 Press the  or  button to select a
folder, and then press the  button.
About the structure of folders and files
The structure of folders and files on the SD
card is different from the one on the built-in
memory (page 44).
37