Sony PCM-D10 Operating Instructions Manual page 14

Identifying parts and controls (continued)
Back/Left side



14

Hole for attaching the tripod
No tripod is supplied with your linear PCM
recorder.

Battery compartment cover (page 19)

(N mark) (page 53)
Put an NFC-compatible smartphone or
Bluetooth audio device onto this mark to
establish a Bluetooth connection.

LINE OUT (line output) jack (page 51)
 (headphones) jack (page 34, 43)


 OUTPUT (headphone output selection)

button (page 34)

Select the left ("L"), right ("R"), or "STEREO"
channel for the headphone output.


LIGHT button

Turns the backlight of the display window on

or off.


VOL + (volume +) button*


VOL - (volume -) button


Built-in Bluetooth antenna
The antenna allows your linear PCM recorder

to connect with Bluetooth devices. Do
not cover the antenna when a Bluetooth
connection is active. Otherwise, the
connection may be interrupted.
 POWER switch (page 20)
Turns the power "ON" or "OFF."

HOLD switch (page 26)
When the switch is placed in the "ON"
position, the buttons on the linear PCM
recorder are disabled to prevent unintentional
operations. We recommended that you keep
this switch placed in the "ON" position during
recording and playback. To enable the button
operations, slide the switch to "OFF."
* There is a tactile dot. Use this dot as a reference
point for operating or identifying the button.