Sony PCM-D10 Operating Instructions Manual page 12

Identifying parts and controls (continued)

Built-in microphones (page 31)

Peak level indicators (L/R) (page 33)
Display the left and right peak levels of an
audio signal input with "-20dB" (green),
"-12dB" (orange), and "OVER" (red) lamps.

Display window (page 15)
STOP button (page 33)


T-MARK (track mark) button (page 60)
 Control button (DPC (Speed Control),
 (repeat) A-B,  (fast reverse),
 (fast forward))

C1 (Custom 1) button (page 64)
You can register frequently-used functions to
this button.

BACK/ HOME button (page 22)
Press briefly to display the previous screen.
Press and hold for 1 second or more to display
the HOME menu.

XLR/TRS INPUT LEVEL (XLR/TRS input type
selection) switch (L/R)
Select "MIC" or "LINE" in accordance with the
device connected to the XLR/TRS jack(s).
 Phantom power switch (L/R)
When connecting an external microphone
with phantom power support to the XLR/
TRS jack(s), slide the switch to "ON" to supply
power.

INPUT (input selection) switch
Slide the switch to "MIC/LINE" to record
audio signals from the external microphone
connected to the MIC IN/LINE IN jack. When
no external microphone is connected to the
MIC IN/LINE IN jack, audio signals from the
built-in microphones are recorded.
Slide the switch to "XLR/TRS" to record audio
signals from the external device connected to
the XLR/TRS jack(s).
REC PAUSE (pause recording) button/

indicator (page 33)
REC (recording) button/indicator

(page 32)
12

C2 (Custom 2) button (page 64)
You can register frequently-used functions to
this button.

OPTION button (page 22)
 (play/enter) button

There is a tactile dot. Use this dot as a
reference point for operating or identifying
the button.

Phantom power indicator (L/R)

Built-in speaker (page 43)

Strap hole
No strap is supplied with your linear PCM
recorder.

XLR/TRS jack (L/R)

MIC IN/LINE IN jack (stereo jack with the
diameter of 3.5 mm (0.14 in))
Connect an external microphone or an audio
device for audio recording.

MIC/LINE INPUT LEVEL (MIC/LINE input
type selection) switch
Select "MIC" or "LINE" in accordance with the
output level of the device connected to the
MIC IN/LINE IN jack.

REC LEVEL (recording level) dial
Adjust the recording volume by turning the
REC LEVEL dial to display the desired level (0
to 10) in the "—" position next to the display
window.
You can adjust the volume for both of the
right and left channels simultaneously by
turning the dial. To change the recording
volume balance between the right and left
channels, pull out the outer dial to separate it
from the inner dial. Then, turn the outer dial to
adjust the volume level of the right channel.
To adjust the level of the left channel, turn the
inner dial.

MIC ATT (microphone attenuator) switch
(page 40)

SD card slot (page 36)
Located behind the slot cover.

USB Type-C™ port