We recommend that you keep the
packaging and the transit bolts for any
movement of the appliance.
Installing anti-tiliting device
If the height of the counter is 820 mm
or lower, you cannot install the anti-
Remove the screws of the top cover on the rear of
the appliance and install the anti-tilting device as
shown in the drawing.
Adjust the anti-tilting device so that the distance
from the counter is 10mm. Loosen the nut
counterclockwise with a 3mm wrench. Adjust the
height and turn the nut clockwise to fix it.
PREPARATION AND ASSEMBLY OF THE
The appliance is originally prearranged for the
assembly of a door opening from right to left (see
- width 595-598 mm
- thickness 16-22 mm
The height X depends on the height of the adjacent