8. Manufacturer ............6 We appreciate your having purchased our phase sequence tester. The TKF-12 tester is a modern high-quality, simple and safe device. However it is recommended to get acquainted with the present manual in order to avoid measuring errors and prevent possible problems related to operation of the meter.
Page 5
(broken, cracked, de- formed, contaminated, etc.). • The TKF-12 tester may be operated exclusively by qualified personnel who are properly authorised to perform work on electric installations. Should the device be operated by unau- thorised personnel, the device may be damaged and there may be a serious danger for the operator.
2. Phase spin direction test • Connect the measurement probes of the TKF-12 tester to the points where there is the expected three-phase voltage (see the illustration below). • If the phases at the given meas- urement points are compliant with...
4. Storage In the case of storage of the device, the following recommen- dations must be observed: • Make sure the tester is dry. 5. Dismantling and utilization Worn-out electric and electronic equipment should be gath- ered selectively, i.e. it must not be placed with waste of another kind.
• three-phase adapter AGT-63P. 8. Manufacturer The manufacturer of the device, which also provides guaran- tee and post-guarantee service is the following company: SONEL S.A. ul. Wokulskiego 11 58-100 Świdnica Poland tel. +48 74 858 38 60 fax +48 74 858 38 09 E-mail: export@sonel.pl...
Need help?
Do you have a question about the TKF-12 and is the answer not in the manual?
Questions and answers