Additional Information; General Information About Assembly; Assembly Tool For The Modular Banc Lounge System; Care Instructions - Powder-Coated Bases - Brunner banc Assembly Instructions Manual

ADDITIONAL INFORMATION

GENERAL INFORMATION ABOUT ASSEMBLY

The assembly instructions provide general guidelines for assembling your banc lounge system
· The steps described should be observed for all modular lounge elements
· The assembly tools suggested are simply recommendations from Brunner GmbH
· Only the materials supplied may be used for assembly
· Brunner GmbH accepts no liability for damage caused during assembly

ASSEMBLY TOOL FOR THE MODULAR BANC LOUNGE SYSTEM

· Cordless screwdriver with hexagon insert, size 3; size 5; size 6
· Hexagon wrench, size 3; size 5; size 6
· Ratchet
· Forked wrench size 8; 10
· Plastic hammer
CARE INSTRUCTIONS – POWDER-COATED BASES
During normal use, it is suffi cient to wipe the powder-coated surfaces with a clean, soft, slightly damp cloth. Any particularly
dirty areas can be cleaned with a standard, grease-dissolving all-purpose cleaner. However, abrasive cleaning agents and
WC or sanitary cleaners must not be used because they may damage the powder-coated surface. Acid or alkaline cleaning
agents and organic solvents must also not be used. Please only use soft cotton cloths for cleaning purposes and certainly do
not use plastic sponges, wire wool or steam jet devices, which could permanently damage the surface. The gliders' surfaces
should be regularly cleaned of coarse pieces of dirt or deposits.
CARE INSTRUCTIONS – COVER MATERIALS AND LEATHER
Cover materials should be regularly vacuumed with a soft attachment. We recommend following the cleaning and care
instructions of the material manufacturer to remove stains and dirt deposits. During normal use, it is suffi cient to wipe the
leather covers with a dry or slightly damp cloth. If dirt has dried on, the best way to clean the area is with a weak neutral
soap solution and a soft cloth. Then remove the soap suds with a damp cloth. The leather cover must never be treated with
standard cleaning agents (washing-up liquid, all-purpose cleaner etc.) because they will irreversibly damage the leather
surface (impregnation/glaze). Solvents, cleaning petrol, stain removers, spirit, shoe cream etc. must also not be used. We
off er an appropriate care kit for cleaning your leather covers.
Electrics and cabling | Additional information
20 . 21