Electrics And Cabling - Brunner banc Assembly Instructions Manual

ELECTRICS AND CABLING

FITTING THE PROFILE BOX UNDER THE SEAT UPHOLSTERY
Included in scope of delivery:
2x assembly sheet
2x shim
Screw the profi le box on to the appropriate bracket. Position bracket on cross beam and screw tight.
Stick on cable duct with adhesive tape
1.
Fit plastic cover
4. Fit sliding block
1x profi le box
1x bracket
1x adhesive tape
2.
Slide in assembly sheets at side
5. Fit electrics to cross beam and bring
cable duct into desired position
2x plastic cover
2x sliding block
1x cable duct
3.
2x M8x12
Screw on bracket and
ground cable