NEC SV9100 Quick Install Manual page 14

NEC SV9100 Communication System
Alarm Alarm
Report
No. Type
61 Not Disabled SIP extension
Enabled
64 Major Disabled VoIPDB LAN Link
65 Not Disabled VoIPDB trouble
Enabled
66 Minor Disabled SIP extension
68 Minor Disabled VoIP DSP All Busy
14
Name
Failed in the registration of a SIP extension
terminal.
trouble information.
The SIP extension terminal was not able to
acquire a DSP.
• At Registration to SV9100 of the SIP
extension terminal.
• When you cannot acquire the DSP resource
when it sends it.
The link of LAN of VoIPDB disconnected.
Error.
When DSP of VoIPDB notifies Error.
information.
More than the number of licenses to which
License Error. the SIP extension terminal was turned on at
REGISTER.
Provides alert when all
Alarm 1 DSP resources are being
. used.
2. Used to troubleshoot or alerting when
upgrade is needed.
Content of Alarm
Quick Install Guide – UNIVERGE ST500 Mobile Client v1.0
Possible Cause(s)
The registered port is used by
other extension.
The number of licenses is
insufficient.
DSP of IPLE was not able to
be acquired.
LAN cable is defective.
Connected network device
not working.
Defect in IPLE.
Defect of IPLE.
Lack of number of licenses.
Not enough DSP resources in
system.