Connecting To Power - Harman Kardon ENCHANT 1300 Owner's Manual

/
CONNECTING TO
POWER
Power On the Soundbar
NOTES:
• Before connecting the power cord, make sure all other
connections have been completed.
• The (Power) button will begin working in 4 to 6 seconds after
plugging in the AC power cord.
• When you disconnect the power cord, always pull the plug, never
the cable.
• Do not connect this unit or other components to an AC outlet until
all connections between components are complete.
ENCHANT 1300
ENCHANT 800
1
2
1) Plug one end of the power cord into the AC IN connector
on the back of the soundbar.
23