Download  Print this page

Connecting To Wi-fi - Harman Kardon ENCHANT 1300 Owner's Manual

Hide thumbs

Advertisement

/
CONNECTING TO
WI-FI
The soundbar is connected to Wi-Fi with the Google Home
app.
1) Download the Google Home app.
2) Power on the soundbar.
3) Open the Google Home app and set up your soundbar as
instructed in the app. Always follow the instructions in the
app to complete the Wi-Fi setup.
4) Sign in with your Google account. If you do not have, create
a new one.
1
2
NOTES:
If you encounter any setup issues, make sure to enable Bluetooth
and location services on your smartphone or tablet.
Once the soundbar is connected to the Internet for the first time,
it may detect a software update to improve performance. This
update may take a few minutes to complete.
In the Google Home app, you can rename the soundbar. The
device name will remain during Bluetooth device discovery and
Google Cast streaming.
Once the soundbar is connected to Wi-Fi, it will receive a periodic
over-the-air software update to improve performance.
To disconnect from the Wi-Fi router and reset the soundbar Wi-
Fi settingsfirst turn the soundbar on, then press and hold the
button on the soundbar top panel for 5 seconds.
3
HK ENCHANT 1300
HK ENCHANT 800
27

Advertisement

Table of Contents

   Related Content for Harman Kardon ENCHANT 1300

This manual is also suitable for:

Enchant subwooferEnchant 800

Comments to this Manuals

Symbols: 0
Latest comments: