Harman Kardon ENCHANT 1300 Owner's Manual page 13

6. SOUND MODE
• Select preset sound modes
to suit your music or video:
STANDARD / MUSIC / MOVIE /
VOICE / PERSONAL.
• Select the STANDARD mode
to enjoy the original sound with
MultiBeam Surround Sound.
• Select the MUSIC mode to
enjoy music sound with a light
MultiBeam Surround Sound
effect.
• Select the MOVIE mode to enjoy
movie sound with MultiBeam
Surround Sound.
• Select the VOICE mode to
enhance dialogue with a light
MultiBeam Surround Sound
effect.
• Select the PERSONAL mode
to enjoy the original sound with
MultiBeam Surround Sound. The
bass setting can be changed to
a personal preference and saved
in the preset.
• Press and hold for 5 seconds to
reset the default audio settings.
7. /
• Skip to the previous or next track
for Chromecast, Bluetooth or
USB playback.
8. SHUFFLE
• Repeat or shuffle play (USB
playback only).
9. BASS - / +
• Decrease or increase the bass
level of the soundbar (or the
subwoofer once successfully
paired).
10. AUDIO SYNC - / +
• Decrease or increase audio sync
delay if the video and audio
synchronization is not correct.
11. NIGHT MODE
• Turn the night mode (Dynamic
Range Control) on or off for
Dolby Digital and DTS tracks.
With the night mode turned
on, loud sound is reduced (the
sound may be distorted).
12.
• Play or pause Chromecast,
Bluetooth or USB playback.
13. BT
• Press to enter Bluetooth pairing
mode.
• Press and hold for 5 seconds to
connect with a new device.
14. SOURCE
• Select an input source for the
soundbar: HDMI ARC/ HDMI 1
/ HDMI 2* / HDMI 3* / Optical /
AUX / USB / BT.
13