NEC P525UL User Manual page 29

Terminal Panel Features
10
1. HDMI 1 IN Terminal (Type A)
(→ page 81, 83, 85)
2. HDMI 2 IN Terminal (Type A)
(→ page 81, 83, 85)
3. COMPUTER IN/ Component Input Termi-
nal (Mini D-Sub 15 Pin)
(→ page 81, 84)
4. AUDIO IN Mini Jack (Stereo Mini)
(→ page 81, 84)
5. AUDIO OUT Mini Jack (Stereo Mini)
Audio signal of the image projected from
the projector is output.
When audio equipment is connected, the
projector speaker is disabled.
6. Ethernet/HDBaseT Port (RJ-45)
(→ page 90)
7. LAN Port (RJ-45)
(→ page 86)
1. Check the product overview, supplied items and part names
8 3
9
1 2 6 7
8. USB Port (Type A)
Connect the USB memory. When picture
data is saved in a USB memory, the picture
can be projected with the [VIEWER] of the
projector.
(→ page 95)
In addition, a 5 V/2.0 A power supply can be
supplied for expansion use.
9. PC CONTROL Port (D-Sub 9 Pin)
Use this port to connect a PC or control
system. This enables you to control the pro-
jector using serial communication protocol.
If you are writing your own program, typical
PC control codes are on page 133.
10. Wireless LAN cover ( )
There are two terminals behind the cover.
• USB (Wireless LAN) Port
(→ page 88)
• SERVICE Port (USB Type B)
(for service purpose only)
4 5 9