NEC P525UL User Manual page 86

4. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: [COLOR] and [MONOCHROME].
Turning On / Off Input Display [INPUT DISPLAY]
This option turns on or off input name display such as [COMPUTER] to be displayed on the top
right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an available
input will be displayed at the center of the screen. When the [USB-A] or [LAN] item is selected for
[INPUT], the no-signal guidance will not be displayed.
Turning On/Off Control ID [ID DISPLAY]
This option turns on or off the ID number which is displayed when the ID SET button on the remote
control is pressed.
Turning On/Off Eco Message [ECO MESSAGE]
This option turns on or off the following messages when the projector is turned on.
The [ECO MESSAGE] prompts the user to save energy. When [OFF] is selected for [ECO MODE], you
will get a message to prompt you to set [ECO MODE].
To close the message, press any one of the buttons. The message will disappear if no button opera-
tion is done for 30 seconds.
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn
off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC].
The [AUTO 45 SEC] is the factory preset.
66