NEC P525UL User Manual page 128

② When connecting with [INFRASTRUCTURE]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Connect the projector and your computer or tablet terminal to the same network.
NOTE:
• Check with the network administrator for the "connection information" of the network to be connected.
3. Start MultiPresenter.
The target device screen is displayed.
4. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.
③ When connecting with a [SIMPLE ACCESS POINT]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Connect your computer or tablet terminal to the access point matching the "SSID" displayed
in the start-up screen.
3. Start MultiPresenter.
The target device screen is displayed.
4. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.
108
7. Connecting to a Network