NEC P525UL User Manual page 133

⑥ NETWORK SERVICE
Configure the [AMX BEACON], [Extron XTP], [HTTP SERVER], [PJLink], [ALERT MAIL], [CRESTRON]
and other settings.
Item name
AMX BEACON
Extron XTP
HTTP SERVER
PJLink
ALERT MAIL
Select whether or not to transmit AMX beacons.
• Initial value: OFF (do not transmit)
Choose whether to enable or disable the connection with the Extron XTP device.
• Initial value: OFF (disable)
Set the password to log into the projector's HTTP server.
• Initial value: Blank
• Allowable characters: Alphanumeric symbols
• Number of characters: 0–10 characters
When a password is set, a number of asterisks "*" equivalent to the number of
characters is displayed.
Set the PJLink password.
PASSWORD SETTINGS
Set alert mail and perform a transmission test.
ALERT MAIL
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1/2/3
TEST MAIL
Description
Set the PJLink password.
• Initial value: Blank
• Allowable characters: Alphanumeric characters
• Number of characters: 0–32 characters
When a password is set, a number of asterisks "*" equiva-
lent to the number of characters is displayed.
Select whether or not to send an alert mail when an alert
target event occurs in the projector.
• Initial value: OFF (do not transmit)
Set the sender's address when sending E-mail from the
projector.
• Initial value: Blank
• Allowable characters: Alphanumeric characters, sym-
bols
• Number of characters: 0–60 characters
Set the SMTP server of the network to connect to the
projector.
• Initial value: Blank
• Allowable characters: Alphanumeric characters, sym-
bols
• Number of characters: 0–60 characters
Set the destination address to send E-mail from the
projector (maximum 3).
• Initial value: Blank
• Allowable characters: Alphanumeric characters, sym-
bols
• Number of characters: 0–60 characters
Send a test mail according to the settings.
113
7. Connecting to a Network