Table of Contents
Advertisement
4. Assembly
Prior to the Installation
Caution: Read the section 'Safety Instructions and Warnings' before attempting to assemble the
FSG200
Before using the FSG200 , the components must be visually checked to ensure that they are not damaged .
Should anything look unusual contact your local dealer prior to use .
Failure to comply with this caution could result in serious injury to the operator, the individual being lifted
and/or damage to the FSG200 and/or portable hoist unit .
1 . Place the Foot Plate on the floor in the
required position for use
3 . Insert the Star Knob into the Foot Plate
and Support Post and tighten it
2 . Insert the bottom of the Support Post
onto the Bottom Foot Plate
4 . Place the Track onto the Support Posts
using the Locating Pins
8
Advertisement
Table of Contents
